How to use ? - Solar pendulum
Step 1
From the blueprints/plans section, download the model and report it or print it on a thick A3 paper.
Spray the other side of the paper with glue and cover it with aluminium foil with the shiny side facing out.
Cut out the two shapes with a pair of cissors.
Join the two ends of the larger shape to form a cone, with the shiny part inside
Attach the two parts by gluing the tab.
Step 6
According to the diagram, create a support for the mobile at 4cm above the board with 2 paper clips (A type) fixed in between nuts.
Close to the top of the metal rods screw two nuts against each other.
Pass on each rod a washer, then a paper clip (B type) followed by a washer and tighten one side with a nut and the other with a winged nut.
Finally, fix the large paper clip (C type) using a winged nut.
Step 8
Cut the ends of the transparent tube in diagonal.
Cut off a branch of the cross junction and slide it on the tube.
Slide the tube through the candy feeding-bottle cap. Slide on the other side of the tube the stopper as shown on the drawing and finally the tube stopper (to help the different elements slide along the tube it is possible to spray some silicone.).